Shelf Man Kit (Available again late-Spring)

SHELF MAN- DIMENSIONS: 20" H x 13" D x 7.5" W. WEIGHT: 11 lbs.  MATERIAL: Black iron. VOLTAGE: 110 volts. BULBS: 1 x T45 Edison 40W or 60W incandescent  (included).  PRODUCTION TIME: Approximately one week. THE LAMP (shown with optional on/off faucet switch):This iron friend will be happy to sit on your shelf, desk, mantle or table. Make of malleable iron components, he will be a lifetime companion. He comes with a standard lamp cord.  A vintage Edison bulb is included with the lamp. An optional inline dimmer module can be added to the standard lamp cord. We recommend adding the dimmer module as it has the capacity to change the "mood" of the lamp. When the dimmer module is set at it's lowest setting, it can be used as a night or low light room light. Other options include choice of different cloth covered lamp cords. The optional dimmer module can be added to your cloth covered lamp cord as well. Included in your kit is our pre-wired light bulb fitting.. Our instructions will show you, step by step, the assembly process. Electrical components can be attached together with our included fittings so you don't have to be a electrician to wire your lamp. In addition, the wall plug with an off/on switch is already attached to a fitting on the kit. All you need to do is attach it to the wires coming from your assembled lamp. If you select the optional dimmer module, we will install it on the lamp cord for you. The optional faucet switch will allow you to turn the lamp on/off with the faucet handle. This lamp on a scale of 1-10 requires a skill level of 5 or above. Lower skill levels can still complete the lamp but it might take additional construction time. The customer should know how to strip wire and be knowledgeable in the use of wire nuts. Our instructions will show you how to do this if you don't know how. A wire stripper is included in your kit. A pipe wrench is needed and may be purchased at very reasonable prices at Walmart or similar stores.